HomeBackNuclearEngineering ServicesEnergy and Utilities
 







Extrusion Press | Puller Systems | Belt Handling | Stretcher Systems | Stacking Systems | Plate Stretchers | Alignment Monitoring Systems | DDI Presses

Considerable improvements in metal recovery can be achieved by the use of a moveable saw to cut the extrusions at the press. The idea is to cut the profiles at the end of the extrusion cycle in such a position that the length between the die and the cut end will be a multiple of the customer required length (plus a scrap allowance).

To fulfil this need MBMHS have developed the ‘Linear Cross Cut Saw’. This machine is mounted on a carriage and is able to move up and down the leadout zone within a specified range (normally four metres) to permit a cutting position at a predetermined length from the die face. Designed to work in conjunction with the puller, complete automation of the pull/clear cycle possible. Recovery figures in excess of 80% can be realised with this equipment.

 

Parallel Cross Cut Saw

Gauge Table & Lift Off

Stop Detail

Final Cut Saw