CNC
2570 Low Pressure Automatic Tank Gauge
Float operated low pressure automatic tank gauge suitable for
pressures up to 1 barg. The aluminium gaugehead is suitable
for metric or imperial calibration, and is complete with an
operational check knob. The standard stainless steel float gives
an accuracy suitable for Custody Transfer Approval.
CNC
2579 Low Pressure Magnetic Link Gauge Designed for use in food, brewing, water, dairy and industries
where tank contents must be maintained in sealed hygienic conditions.
In this system the annular float contains magnets and travels
up and down a thin stainless steel walled float guide tube.
This tube is sealed to prevent ingress of tank contents. Inside
the tube a magnetic follower is suspended on the perforated
tape connected to the gauge head. This follower, locked magnetically
to the float, follows liquid level change and causes corresponding
movement in the perforated tape. The tape is connected to the
standard CNC 2570 Series gaugehead unit.
CNC
2580 High Pressure Automatic Tank Gauge Float operated high pressure automatic tank gauge suitable
for pressures up to 300 psig. Gaugehead in cast steel is suitable
for metric or imperial calibration. Contains magnetic link
drive. Multisphere float, tape and guidewires in stainless
steel.
