Force 5®
“Offshore” Man Rider® Series
3180 to 6875 lb (1445 to 3125 kg) capacity
Known worldwide as the standard for meeting the toughest personnel
lifting requirements in the offshore industry. Dual rated for personnel
and utility lifting applications, these winches have type approval
or Independent Review certificates issued by the classification societies
of DNV, ABS, or LRS. Meet NPD, NMD and Den regulations for personnel
lifting operations. Oil field tough to weather the harsh environments
in marine applications.
Standard features:
Automatic disc brake for positive self-adjusting operation
Enclosed oil bath “wet” disc brake is fully sealed for protection
against salt spray, dirt or moisture, providing trouble-free operation
over thousands of lifting cycles
Manual band brake for additional braking by the operator
Galvanised drum guard supports the weight of a 200 lb person
24 inch drum length provides ample wire rope storage for most
applications
Ingersoll-Rand data book available on request
Top layer rated pull. A Force 5 winch always pulls or lifts
its “rated load” at any layer of wired rope
Internal gearbox and disc brake combination offer superior load
control when compared with all other types of air winches
Compact space-saving frame design and fabricated alloy steel
drum fits into tight spaces
Versatile design for special applications requiring variable
drum length and wire rope storage.
Standard operating temperature range is 0°C through 60°C
Minimum 18:1 drum diameter to wire rope diameter ratio reduces
wire rope tear
Dual rated 8:1 design factor for manrider rating; 5:1 design
factor for utility rating
Options and accessories
Automatic band brakes
Variable drum lengths 8″ to 42″
Grooved drums
Drum divider flange
Upper and lower limit switches
Corrosion resistant marine grade coating system
Remote control
Air preparation packages; filter, lubricator, strainer, liquidator
and regulator
Muffler
Hydraulic models
Electric-Over-Air remote control pendent for virtually unlimited
pendent length
Optional “Accu-Trol” pilot air pendent allows an operator to
move up to 50 feet from the winch with no loss in “spotting” ability
because of remote control “lag”
Third party certifications for low temperature applications
Specifications
and performance at 90 psi
Lifting
Capacity (top layer)
Maximum
stall pull
Air
consumption
Pipe
inlet size
Hose
size
Weight
Model
No.
Personnel
Utility
lbs
kg
lbs
kg
lbs
kg
scfm
m3/min
(in.)
in.
mm
lbs
kg
FA2MR16MK1G
3180
1445
440
2000
9000
4090
335
9.5
1
1
¼
32
850
386
FA2MR24MK1G
3180
1445
440
2000
9000
4090
335
9.5
1
1
¼
32
850
386
FA2.5MR16MK1G
3180
1445
5000
2273
10000
4545
700
19.9
1
1/4
1
½
38
1160
527
FA2.5MR24MK1G
3180
1445
5000
2273
10000
4545
700
19.9
1
1/4
1
½
38
1160
527
FA5MR24MK1G
6875
3125
11000
5000
24000
10909
700
19.9
1
1/4
1
½
38
1880
855
Note: adding “-E” to model states compliance with European Machinery
Directive. 1. “-E” models for the European Union allow one lift capacity
rating only; i.e., only personnel lift rating is allowed for both
personnel and utility applications 2. Utility rating only for those countries that allow dual
ratings, e.g. USA.
Drum
rope storage for personnel lifting(1)
Model
no.
Drum
length
Rope
diameter
½
in (13 mm)
¾
in (19 mm)
in.
mm
ft
m
ft
mm
FA2MR
and FA2.5MR
8
203
258
79
–
12
305
396
121
–
16
406
534
163
–
24
610
809
247
–
F5MR
8
203
235
72
12
305
365
111
16
406
495
151
24
610
755
230
(1) Based on U.K.
Den standards which require the top layer to be 2 ½ times the wire
rope diameter below the drum flange diameter.
Recommended wire rope: Extra improved plow steel (EIPS) 6´19 IWRC