Extrusion
Systems | Puller
Systems |
Cutting Systems
| Belt
Handling Systems
| Stretcher
Systems | Plate
Stretchers | Alignment
Monitoring Systems | DDI
Presses
The low level stacker is the latest development
in basket stackers from MBMHS and is probably the fastest acting
stacker in the world today. Coupled with the MBMHS Spacer hopper
and dispenser, it offers reliable, trouble free stacking of sections
from the gauge table lift off directly into baskets (skips or stillages).
The stacker eliminates the need to have an extra
man at the saw to assist the sawman to load sections into the basket.
With an automatic saw, one man is sufficient.
Stackers are loaded onto the stacker booms automatically
and fed over the basket with the sections. The sections are lifted
off the booms with the spacers and sections are lowered into the
basket.
The stacker will handle short lengths as double
or triple piece loads, the only restriction on length is that the
cut piece must always rest on at least two booms. The stacker will
also group the extrusions at the correct widths for the basket so
that it is quite possible to load a 900 mm wide skip from a 1200
mm wide saw line or vice versa.
Many types of spacer design are permitted, the only
restriction is that the spacers have square edges. We can provide
designs for both baskets and spacers if required.