Thermoplastics – Fabricated Polyethylene Fittings

MB Plastics designs and manufactures a wide range of fabricated Polyethylene fittings.

• Mitred Bends – Any angle available, sizes range from 63 to 1200 millimetres. – Any radius available, 63 to 1200 millimetres. Standard angles are – 111/4, 221/2, 45 and 90 degrees.
• Pupped Stub Flange Assemblies – Complete with galvanised mild steel, Rilsan coated backing rings from 63 to 1200 millimetres.
• Slim Flange Assemblies – Designed to use one size below drilling i.e., 250 millimetre pipe with 8 inch drilling.
  Size range, 250 – 200 millimetres / 8 inch NP16 to 450 – 400 millimetres / 16 inch NP16
• Pupped Moulded Fittings – 90 and 45 degree elbows, equal tees, reduced branch tees, caps and reducers.
• Specials
  
  
  • Lateral Tees, 45, 60 degrees, etc.
  • Manifolds
  • De-Watering Lances
  • Full Pressure Tees (using fibreglassed fittings)
  • Pulling Heads
  • Eccentric Reducers
  • Concentric Reducers
  • Hydrant Tee

Materials available include:

HDPE (Black PE80)
HPPE (Black PE100)
HPPE (Blue)
MDPE (Blue)
MDPE (Yellow PE80)

Pressure Ratings (Bar Rating/Working Pressure)