Automatic
Handling Systems | Pallet
Magazines | PLC
& PC Control Systems
| Presses for
Wet Concrete | Slab
& Kerb Tooling | Special
Moulds | Volumetric
Dosing Units
A static concrete
block making machine from MBMHS, the MK20 offers complete flexibility
in concrete product manufacture.
Combining
versatility with robust, simple construction and design to
accept various mould types, it can manufacture a wide variety of
products to the strength and quality that the market requiries,
using a semi-dry concrete mix.
Where higher output and lower unit costs are the
priorities, the MBMHS MK20 block making machine is the ideal choice.
Compaction is by vibration with hydraulic pressure to give consistent
results and optimum cement usage.
MBMHS offers a variety of options from manually
operated to highly automatic equipment. Our services range from
the supply of the blockmaking machine and auxillary equipment to
the design, supply and commissioning of complete turnkey installations.
MK20 Static Concrete Block Machine
MK20 Static Concrete Block Machine Specifications
- Compaction
type: Electrically driven vibrators with hydraulic pressure.
- Controls:
Either hand lever controls or programmable Logic Controller.
- Production
rate: Up to 3 cycles per minute.
- Maximum mould
area: 1066mm x 500mm with plain pallets. 966mm x 500mm with legged
pallets.
- Product depth:
40mm up to 230mm.
- Hopper capacity:
0.9m3.
- Services
required: Electricity 16 kW.
- Installed
dimensions: 4.5m x 2.1m x 2.8m higher.
- Nett weight:
4,400kg (including mould).
MK4 Static Concrete Block Machine
The MK4 machine is available in two options dependant
on mould area. It is robust, simple in design and of low cost. Manually
operated, it has simple feeding and block handling arrangements.
The range, because of its simplicity, is ideally
suitable for operation by unskilled labour and requires little maintenance.
The MK4 machine gives excellent compaction resulting in dense products.
It is ideally suited for low volume output particularly where special
blocks are required to support larger volume sales.
For operation in areas without a suitable electrical
supply the vibrator can be powered by a diesel engine.
MK4 Static Concrete Block Machine
Specification
- Compaction:
Electrically driven vibrator.
- Controls:
Manual.
- Production
rate: Operator Controlled.
- Maximum moulding
area:
535mm x 370mm (option A)
625mm x 460mm (option B)
- Product depth:
Minimum 50mm
Maximum 230mm
- Services
required: Electricity 6kW
- Installed
dimensions: 2.4 x 1.6 x 1.9m high
- Nett weight:
780 kg (excluding mould)
- Palletts:
plain pallets in plywood or timber.
|